CADD Edge offers regularly scheduled educational webinars. These events cover SolidWorks basics and design process fundamentals. Find out how to increase the accuracy and reliability of your product designs with SolidWorks CAD Software, optimize the design and development process with SolidWorks Simulation, communicate and display design concepts more effectively through 3DVia Composer, manage and share your design data anywhere with SolidWorks Enterprise PDM, and print detailed 3D prototypes that reduce the need to rework your product designs with Objet Geometries.
Flow Simulation: Electronic Enclosure Modeling Using The New Electronic Cooling Module
May 15, 2012 - 1:00pm to 2:00pm
Have you ever wondered how best to model your electronic enclosure and tackle cooling challenges using Flow Simulation? Then Electronic cooling module
is the right module for you. As a part of the Simulation package, this module allows you to optimize the thermal performance of your PCBs and electronic components.
Topics Covered: Two-resistor Component Compact model; Joule Heating; Heat pipe Compact model; PCB generator; Thermal contact resistance; Post processing features; Fans and Fan curves.
Click here to Register
SolidWorks 2012 Technical Tour
May 16, 2012 -10:00am to 11:00am
This web-based demonstration is an introductory look at the full SolidWorks suite of products to show how easy it is to create parts, assemblies and drawings, simulate your design, control the entire design, and create technical documentation. You will see how to: quickly generate new designed parts to then assemble and generate detailed drawings, accurately track all your revisions and workflows, run simulation tools to test the design before costly material is cut, and generate technical documents for assembly instructions concurrently with the design avoiding delays at the end.
Click here to Register
Using SolidWorks Plastics Premium to Optimize the Design of Plastic Parts and Molds
May 18, 2012 - 1:00pm to 2:00pm
Learn how to use SolidWorks Plastics Premium to help in the design and manufacture of plastic injection molded parts. We will see how to determine if a part will fill, detect air traps, check for sink marks and weld lines. When designing tooling it will help with runner design and layout in multi-cavity molds, runner balancing in multi-cavity molds with different parts, and predicting fill, and cooling times, and clamping forces needed.
Click here to Register
Drop Test Using SolidWorks Simulation
June 5, 2012 - 10:00am to 11:00am
Do you want to do a drop test on parts and assemblies and find out the stresses and displacements? If so, join this webinar to see why Simulation Professional is the right package for you. This session will cover drop tests on laptops and cameras, stresses and displacements analysis, and time hostory plots.
Click here to Register
Increase Productivity with TactonWorks
June 12, 2012 - 10:00am to 11:00am
See how TactonWorks Design Automation Software can generate engineered to order parts, assemblies and drawings faster than ever before. In this seminar we’ll show you how Tacton’s intuitive interface and powerful configuration engine harness engineering rules to automatically and accurately configure an entire product in seconds, reducing error, lead times, and CAD time.
Click here to Register
HSMXpress: What Does FREE Get You?
June 12, 2012 - 1:00pm to 2:00pm
We keep getting asked 2 questions about HSMXpress. “Is it true that HSMWorks is giving their FULL 2 ½ axis mill package away for free?” And that is normally followed up with, “What do mean by FREE”. The answers are YES and no cost. Come take a look at what is included in the next generation of CAM HSMXpress. We will be covering everything from simple drilling and milling to the original 2D adaptive clearing routine. Does HSMXpress have a solid stock simulator? Again the answer is yes. Does HSMXpress have form tool support? Once again yes it does. Come take a look at what you can get for FREE and exactly what FREE gets you and why.
Click here to Register
SolidWorks 2012 Technical Tour
June 13, 2012 - 10:00am to 11:00am
This web-based demonstration is an introductory look at the full SolidWorks suite of products to show how easy it is to create parts, assemblies and drawings, simulate your design, control the entire design, and create technical documentation. You will see how to: quickly generate new designed parts to then assemble and generate detailed drawings, accurately track all your revisions and workflows, run simulation tools to test the design before costly material is cut, and generate technical documents for assembly instructions concurrently with the design avoiding delays at the end.
Click here to Register
InspectionXpert: Fast, Accurate Inspection Plans in Minutes!
June 19, 2012 - 10:00am to 11:00am
Join us to see how to quickly create inspection reports and ballooned drawings from SolidWorks or PDF/TIFF for AS9102, PPAP, first article, and in-process inspections.
Click here to Register
Unified BOM Management with Omnify PLM
June 26, 2012 - 1:00pm to 2:00pm
Join CADD Edge as we demonstrate Omnify PLM software’s ability to manage your product’s BOM, no matter how complex. MCAD, ECAD, Software, Documentation, etc. all need to be included in your product when it gets delivered to your customers. Why not manage your entire product development with one tool as well? See how successful businesses use the Omnify PLM product to do just that.
Click here to Register