Directions to our Westborough Office:
From Boston:
Take the Rt. 90 (Mass Pike) West to Exit 11A (Rt. 495 North) Take Rt. 495 North to Exit 23B, Rt. 9 West, Worcester. Take the first exit off of Rt. 9, the Computer Drive/Research Drive exit. Stay left on ramp and follow to the light. Make a left at the light and follow road to the next set of lights (road turns left and crosses over Rt. 9). Make a left again and drive straight (through one more set of lights). Take the next right into the parking lot for One Research Drive, Westborough Business Park.  On the front of the building it says University of Phoenix.

CADD Edge is located in Suite 300B.

From NH:
Take 495 South to Exit 23B, Rt. 9 West, Worcester. Take the first exit off of Rt. 9, the Computer Drive/Research Drive exit. Stay left on ramp and follow to the light. Make a left at the light and follow road to the next set of lights (road turns left and crosses over Rt. 9). Make a left again and drive straight (through one more set of lights). Take the next right into the parking lot for One Research Drive, Westborough Business Park.  On the front of the building it says University of Phoenix.

CADD Edge is located in Suite 300B.

From CT:
Take Rt. 90 East (Mass Pike) to Exit 11A (Rt. 495 North) Take Rt. 495 North to Exit 23B, Rt. 9 West, Worcester. Take the first exit off of Rt. 9, the Computer Drive/Research Drive exit. Stay left on ramp and follow to the light. Make a left at the light and follow road to the next set of lights (road turns left and crosses over Rt. 9). Make a left again and drive straight (through one more set of lights). Take the next right into the parking lot for One Research Drive, Westborough Business Park.  On the front of the building it says University of Phoenix.

CADD Edge is located in Suite 300B.

Directions to our New Hampshire office:
From Points North of Londonderry
Take exit 4 off 93 South in NH. Turn right at the end of the exit ramp onto Rte. 102. At the second set of lights, turn right onto Gilcrest. Once on Gilcrest take your first right onto Commons Drive. Follow to the stop sign. Drive straight thru the stop sign. Take the next right into the set of office buildings. Our building is the one on the left. Building “D” Unit #19. We are the first door on the right of that building. (CADD EDGE sign above)

Directions to the New York, NY Office:
From E. River Drive/FDR Drive
Take the E. Houston Exit. Proceed along E. Houston heading West. Take a right onto Lafayette, followed by a left onto West 3rd Street. Make a left onto Broadway. (The cross street is Bleeker Street.)

From NY-9A/West Side Highway
Heading South – Take a left onto West 14th Street, then a right onto Broadway. (The cross street is Bleeker Street.)

From the Holland Tunnel
Proceed onto Canal Street heading East. Turn left onto West Broadway. West Broadway then becomes LaGuardia Pl. Turn right onto Bleeker Street. Then turn right onto Broadway.

Mass Transit Information

From Grand Central Terminal:
Take the 6 (Green) Train Downtown. Get off at the Bleecker Street Stop. Walk West on Bleecker Street, followed by a left onto Broadway.

To return to Grand Central, you will need to walk to Lafayette St. (East Side of Lafayette) and Bleecker Street. This will be the Bleecker Street stop, where you can catch the uptown 6 Train.

From Penn Station:
Take the Blue Line (A,C,E) downtown. Transfer at the West 4th stop to the B, D, F, V (Orange) - towards Downtown/Brooklyn. Get off at the Broadway/Lafayette stop. Walk 1 block North on Broadway.

From the PATH Train:
Transfer at 14th Street to the F, V (Orange) - towards Downtown/Brooklyn. Get off at the Broadway/Lafayette stop. Walk 1 block North on Broadway.

Directions to our Bohemia, NY Office: 80 Orville Drive, Suite 221

From the LIE East
Take exit 60 toward Lake Ronkonkoma/Sayville/Ronkonkoma Ave.  Merge onto Expy Dr N.  Turn left at Ronkonkoma Ave. Continue on as it becomes Smithtown Ave.  Turn left at traffic light onto CR-93/Lakeland Ave.  Turn left at RT-454 E/Veterans Memorial Hwy  Orville Drive is the first traffic light on Veterans Highway.  The sign at the entrance to Orville Drive says "Rechler Business Park" and there is an HSBC Bank on the corner.  Turn right at Orville Dr.  Continue to 80 Orville Drive on right.  

From the LIE West
Take exit 59 Ocean Avenue, go south on Ocean Avenue, bear left on Lakeland Avenue, turn left on Vets Highway. Orville Drive is the first traffic light on Veterans Highway coming from the west.  The sign at the entrance to Orville Drive says "Rechler Business Park" and there is an HSBC Bank on the corner.  TURN RIGHT on Orville Drive.  We're at 80 Orville Drive, Suite 221.

Directions to our Sharpsville, Pennsylvania Office:
From Interstate 80 Exit 4
Take Route 18 North, continue for approximately 4 miles, you will pass Lowes, the Shenango Valley Mall, and Walmart.  At the second light past Walmart, make a left on Lamor Rd.  Follow Lamor Rd, through the first traffic light to a stop sign (approximately 1 mi.).  Go straight for approximately 200 yards turn right into the Sharpsville Plaza (before second stop sign).  We are located at the opposite end of the Sharpsville Plaza next to the Post Office. 

From Points East and West:
Take Interstate 80 to Exit 4 Sharon/Hermitage in Pennsylvania.  Follow directions from Interstate 80 Exit 4.

From Points North and South:
Interstate 79 to Interstate 80.  Interstate 80 West to Exit 4 Sharon/Hermitage. Follow directions from Interstate 80 Exit4.

From the East via PA Turnpike - Exit the Turnpike at Valley Forge exit number 20 - Mid-County; Then take I-476 South for approx 12 miles. Take the Media Exit #3;  Turn RIGHT onto E BALTIMORE PIKE. E BALTIMORE PIKE becomes E BALTIMORE AVE;  Turn RIGHT onto S. Orange st.  Make an immediate left onto Baker St. and the Parking Lot (Bring quarters for parking meters).  The office is in the corner building at State Street and Orange Street. SolidWorks, 300 West State St, Third Floor.

From Delaware Area - Take I-95 North ... Merge onto I-476 N via EXIT 7 toward PLYMOUTH MEETING ... Take EXIT 3 toward MEDIA ... Turn LEFT at the exit ramp onto E BALTIMORE PIKE.  E BALTIMORE PIKE becomes E BALTIMORE AVE;  Turn RIGHT onto S. Orange st.  Make an immediate left onto Baker St. and the Parking Lot (Bring quarters for parking meters).  The office is in the corner building at State Street and Orange Street. SolidWorks, 300 West State St, Third Floor.

From the Philadelphia Airport - Take I-95 South ... Merge onto I-476 N via EXIT 7 toward PLYMOUTH MEETING; Take EXIT 3 toward MEDIA. Turn LEFT onto E BALTIMORE PIKE.  E BALTIMORE PIKE becomes E BALTIMORE AVE;  Turn RIGHT onto S. Orange st.  Make an immediate left onto Baker St. and the Parking Lot (Bring quarters for parking meters).  The office is in the corner building at State Street and Orange Street. SolidWorks, 300 West State St, Third Floor.

Directions to Rhode Island Training:
Training is located at the New England Institute of Technology, Julian B. Gouse Warwick Campus, 2500 Post Road, Warwick.

South or North on Rte. 95 take the airport exit 13 (Post Road exit) Take a right at the bottom of ramp, the Julian B. Gouse Warwick campus is on the left.