|
|
|
|
|
|
 |
| Are you a current SolidWorks customer? |
|
See our training classes to enhance your design experience!
|
 |
|
|
|
|
|
|
Contact & Directions |
CADD Edge, Inc. services MA, NH, ME, VT, RI, CT, PA, OH, WVA, NY, NJ
Technical Support Phone: 888 223.3334 ext. 2999 E-Mail: support@caddedge.com
Sales: Phone: 888.223.3334 press 5 for assistance Send an inquiry
Training or to schedule the MLC onsite at your facility Register for Training
Events - All Events are FREE of Charge Customers Events: SolidWorks CAD Software, SolidWorks Product Data Management, SolidWorks Simulation, Webcasts, ZCorporation, all seminar sessions are at no cost to you! Register for a Seminar
Note: If you do not see an office near you call 888.223.3334
Directions to our Westborough Office:
From Boston: Take the Rt. 90 (Mass Pike) West to Exit 11A (Rt. 495 North) Take Rt. 495 North to Exit 23B, Rt. 9 West, Worcester. Take the first exit off of Rt. 9, the Computer Drive/Research Drive exit. Stay left on ramp and follow to the light. Make a left at the light and follow road to the next set of lights (road turns left and crosses over Rt. 9). Make a left again and drive straight (through one more set of lights). Take the next right into the parking lot for One Research Drive, Westborough Business Park. On the front of the building it says University of Phoenix.
CADD Edge is located in Suite 100A on the first floor.
From NH: Take 495 South to Exit 23B, Rt. 9 West, Worcester. Take the first exit off of Rt. 9, the Computer Drive/Research Drive exit. Stay left on ramp and follow to the light. Make a left at the light and follow road to the next set of lights (road turns left and crosses over Rt. 9). Make a left again and drive straight (through one more set of lights). Take the next right into the parking lot for One Research Drive, Westborough Business Park. On the front of the building it says University of Phoenix.
CADD Edge is located in Suite 100A on the first floor.
From CT: Take Rt. 90 East (Mass Pike) to Exit 11A (Rt. 495 North) Take Rt. 495 North to Exit 23B, Rt. 9 West, Worcester. Take the first exit off of Rt. 9, the Computer Drive/Research Drive exit. Stay left on ramp and follow to the light. Make a left at the light and follow road to the next set of lights (road turns left and crosses over Rt. 9). Make a left again and drive straight (through one more set of lights). Take the next right into the parking lot for One Research Drive, Westborough Business Park. On the front of the building it says University of Phoenix.
CADD Edge is located in Suite 100A on the first floor.
Directions to our New Hampshire office:
From Points North of Londonderry Take exit 4 off 93 South in NH. Turn right at the end of the exit ramp onto Rte. 102. At the second set of lights, turn right onto Gilcrest. Once on Gilcrest take your first right onto Commons Drive. Follow to the stop sign. Drive straight thru the stop sign. Take the next right into the set of office buildings. Our building is the one on the left. Building “D” Unit #19. We are the first door on the right of that building. (CADD EDGE sign above)
From Points South of Londonderry Take exit 4 off 93 North in NH. Turn left at the lights at the end of the exit ramp onto Rte. 102. At the third set of lights, turn right onto Gilcrest. Once on Gilcrest take your first right onto Commons Drive. Follow to the stop sign. Drive straight thru the stop sign. Take the next right into the set of office buildings. Our building is the one on the left. Building “D” Unit #19. We are the first door on the right of that building. (CADD EDGE sign above)
Directions to our Connecticut office:
Take 84 East or West to exit 37 (Fienemann Rd/Farmington Ave). At the end of the ramp turn left onto Fienemann Rd. Turn left onto US-6 and then your first right on Stanford Dr. (Farmington Mountain Office Park) The building is first one on the right. Proceed to the second floor.
Directions to the New York, NY Office:
From E. River Drive/FDR Drive Take the E. Houston Exit. Proceed along E. Houston heading West. Take a right onto Lafayette, followed by a left onto West 3rd Street. Make a left onto Broadway. (The cross street is Bleeker Street.)
From NY-9A/West Side Highway Heading South – Take a left onto West 14th Street, then a right onto Broadway. (The cross street is Bleeker Street.)
From the Holland Tunnel Proceed onto Canal Street heading East. Turn left onto West Broadway. West Broadway then becomes LaGuardia Pl. Turn right onto Bleeker Street. Then turn right onto Broadway.
Mass Transit Information
From Grand Central Terminal: Take the 6 (Green) Train Downtown. Get off at the Bleecker Street Stop. Walk West on Bleecker Street, followed by a left onto Broadway.
To return to Grand Central, you will need to walk to Lafayette St. (East Side of Lafayette) and Bleecker Street. This will be the Bleecker Street stop, where you can catch the uptown 6 Train.
From Penn Station: Take the Blue Line (A,C,E) downtown. Transfer at the West 4th stop to the B, D, F, V (Orange) - towards Downtown/Brooklyn. Get off at the Broadway/Lafayette stop. Walk 1 block North on Broadway.
From the PATH Train: Transfer at 14th Street to the F, V (Orange) - towards Downtown/Brooklyn. Get off at the Broadway/Lafayette stop. Walk 1 block North on Broadway.
Directions to our Fort Washington, Pennsylvania Office:
From PA/NY/NJ: Take exit 339 from I276 PA turnpike to route 309/Ft. Washington Expressway. Bear right from the toll booth onto Pennsylvania Avenue and turn right onto Commerce Drive. In 0.6 miles turn right on Delaware Avenue/Virginia Drive. Continue on Virginia Drive for approximately 1.5 miles and turn left onto Office Center. Take the first right into the office park. Building 1300 is straight ahead. Our suite is on the first floor to the right of the front doors.
Directions to Rhode Island Training:
Training is located at the New England Institute of Technology, Julian B. Gouse Warwick Campus, 2500 Post Road, Warwick.
South or North on Rte. 95 take the airport exit 13 (Post Road exit) Take a right at the bottom of ramp, the Julian B. Gouse Warwick campus is on the left. |
 |
|
|
|
 |
| CADD Edge Offices: |
Corporate Headquarters
One Research Drive, Suite 100A
Westborough, MA 01581
Phone: 508.475.2900
Fax: 508.366.1333
New Hampshire Office
1D Commons Drive, Suite 19
Londonderry, NH 03053
PH: 603.432.2791
FX: 603.432.2419
Connecticut Office
50 Stanford Drive, 2nd Floor
Farmington, CT 06032
Ph: 860.677.4312
Fax: 860.677.4792
New York Manhattan Office
636 Broadway, Suite 610
New York, NY 10012
PH: 212.614.2223
FX: 212.614.7354
Philadelphia Office
1300 Virginia Dr Suite 145
Fort Washington, PA 19034
Ph: 215.643.9300
Pennsylvania Office
12330 Perry Highway
Suite 115
Wexford, PA 15090
PH: 724-940-7333
FX: 724-940-7336
Rhode Island Training
New England Institute of Technology
Julian B. Gouse Warwick Campus
2500 Post Road
Warwick, RI 02886
PH: 888.223.3334
FX: 508.366.1333 |
 |
|
|
|
|
|
|
|
 |
|
CADD Edge Offices, Training and Seminar locations: Massachusetts, New Hampshire, Connecticut, Maine, Vermont, Rhode Island, New York, New Jersey, Pennsylvania, Ohio and W. Virginia. Click here for Office Locations.
Products: SolidWorks® CAD Software, SolidWorks® Simulation, SolidWorks® Product Data Management, 3DVIA Composer, DriveWorks Agile, Z Corporation and more.
SolidWorks® CAD Software, combined with our comprehensive training program, high level customer service, and years of industry experience, will help your team design the best products and get them to market faster.
|
|
|
|